Search
Close this search box

DEME Installs First Transition Piece at Nordlicht I

DEME has installed the first transition piece at Vattenfall’s 980 MW Nordlicht I offshore wind farm in the German North Sea, following the first monopile installation in early July.
Photo source: DEME

SHARE ARTICLE

The first transition piece has been installed at Vattenfall’s Nordlicht I offshore wind farm in the German North Sea. The milestone follows the installation of the project’s first monopile in early July.

Under a contract awarded in 2024/2025, DEME is responsible for transporting and installing the monopiles and transition pieces.

The transition pieces are being manufactured by CS WIND Offshore in Aalborg. EEW Special Pipe Constructions (EEW SPC) is producing the monopiles in Rostock.

Nordlicht I will comprise 68 monopile foundations supporting 68 Vestas V236-15.0 MW wind turbines. The offshore wind farm will have a total capacity of 980 MW.

Nordlicht II, the second offshore wind farm in the 1.6 GW Nordlicht cluster, will have a capacity of 630 MW. It will comprise 44 Vestas 15 MW turbines installed on monopile foundations. EEW Special Pipe Constructions (EEW SPC) and CS WIND Offshore will supply the foundation components.

Construction of Nordlicht II is scheduled to begin next year. Nordlicht I is set to enter commercial operation in 2028, followed by Nordlicht II in 2029.

The Nordlicht offshore wind cluster is being built about 85 km north of the island of Borkum. Once fully commissioned, the two projects are expected to generate around 6 TWh of electricity annually.

Editorial Note:
This article was prepared with the assistance of AI tools to enhance clarity and efficiency.
All information has been reviewed and verified by the HMT News editor.
Vineyard Wind 1 has reached full commercial operation off Massachusetts. The $4.5 billion offshore wind project features 62 turbines with a combined generating capacity of 800 MW.
Ørsted says the 704 MW Revolution Wind farm reached full commissioning in October and now supplies power to Rhode Island and Connecticut. Installation of all 65 Siemens Gamesa turbines was completed in September.
VARD has cut the first steel for NB 1004, the second CSOV ordered by UPO. The hybrid vessel is being built at Vard Vung Tau for offshore wind operations in Taiwan and the wider Asia-Pacific region.

Subscribe to HMT WEEKLY

Receive HMT WEEKLY in your mailbox.

Heavy Marine Transport News, Delivered Daily — Stay informed on shipping, offshore, and global logistics.

SECTION

INFORMATION

CONTACT

For general inquiries and to contact us,
please email: info@hmt-news.com