Offshore - Renewable

Envision Energy Installs First Turbine at 128 MW Vinh Long Wind Project

Envision Energy has installed the first turbine at the 128 MW Vinh Long nearshore wind projects in Vietnam, where 16 EN-226/8.X MW wind turbines are planned.

Photo: Envision Energy via LinkedIn

16, September 2026
382 Views

Envision Energy has installed the first wind turbine at the 128 MW Vinh Long nearshore wind projects in Vietnam, marking the start of turbine installation at the site.

The developments comprise the 48 MW V1-3 Phase II project and the 80 MW V1-5&6 Phase II project in Vinh Long Province. REE Group is developing the projects, which will feature a total of 16 EN-226/8.X MW wind turbines supplied by Envision Energy.

According to Envision Energy, installation of the first EN-226/8.X MW turbine was completed in less than seven days. Work on the second unit took less than five days. The installation activities were carried out amid heavy rainfall and strong winds.

The latest milestone follows the start of turbine deliveries for the projects in June 2026. Envision Energy shipped the first four sets of EN-226/8.X MW turbines to Vietnam at that time.

The turbine supplier identifies Vinh Long as its first overseas offshore wind project.

The two Vinh Long developments have a combined capacity of 128 MW. Installation work on the remaining EN-226/8.X MW turbines is continuing.

Tags: EN-226/8.X MW, Envision Energy, nearshore wind, offshore wind, REE Group, V1-3 Phase II, V1-5&6 Phase II, Vietnam, Vinh Long, wind turbine

Editorial Note:
This article was prepared with the assistance of AI tools to enhance clarity and efficiency.
All information has been reviewed and verified by the HMT News editor.

6, Nov
|

Offshore - Renewable

704 MW Revolution Wind Fully Commissioned, Supplying Power to Two States

Ørsted says the 704 MW Revolution Wind farm reached full commissioning in October and now supplies power to Rhode Island and Connecticut. Installation of all 65 Siemens Gamesa turbines was completed in September.

6, Nov
|

Offshore - Renewable

VARD Cuts First Steel for UPO CSOV NB 1004

VARD has cut the first steel for NB 1004, the second CSOV ordered by UPO. The hybrid vessel is being built at Vard Vung Tau for offshore wind operations in Taiwan and the wider Asia-Pacific region.

5, Nov
|

Offshore - Oil & Gas

Fugro confirms BSH work in Germany

Fugro says it has secured new BSH work in Germany. A separate BSH procurement notice describes geotechnical investigation and laboratory services but lists no award details.